Minnesota’s car tint laws are designed to balance vehicle aesthetics and privacy with safety and visibility concerns. Understanding these laws is crucial for vehicle owners to avoid legal issues and ensure compliance. This article will provide a detailed overview of Minnesota’s car tint laws, including specific regulations, exemptions, and penalties.
Overview of Minnesota Car Tint Laws
In Minnesota, window tint laws are primarily concerned with two aspects: the darkness of the tint, measured by Visible Light Transmission (VLT), and the reflectiveness of the tint. VLT is the percentage of visible light that passes through the window. A higher VLT means more light passes through, which is crucial for maintaining visibility both for drivers and law enforcement officers.
Quick Reference Table: Minnesota Tint Limits
| Window Location | Minimum VLT Allowed | Notes |
|---|---|---|
| Windshield | No tint allowed | AS-1 line not applicable |
| Front Side Windows | 50% | Applies to driver/passenger windows |
| Back Side Windows | 50% | Applies to windows behind driver/passenger |
| Rear Window | 50% | Dual mirrors not required |
Explanation of VLT Measurements
Visible Light Transmission (VLT) is a critical measure in window tinting laws. It indicates the amount of light that can penetrate through the window film and glass. In Minnesota, the law stipulates that front side windows must allow more than 50% of light in, which means they cannot be tinted darker than this threshold. This regulation ensures that drivers have sufficient visibility while operating their vehicles and that law enforcement can see inside the vehicle when necessary.
Importance of Compliance
Compliance with VLT regulations is essential for several reasons:
- Safety: Ensures that drivers have adequate visibility, especially at night or in poor weather conditions.
- Law Enforcement: Allows officers to see inside vehicles during traffic stops for safety reasons.
- Legal Consequences: Non-compliance can result in fines and penalties, which we will discuss later.
Understanding these limits helps vehicle owners make informed decisions about tinting their windows within legal boundaries.
Tint Reflection & Color Restrictions
Minnesota also regulates the reflectiveness of window tints. Reflective tints can reduce glare but may also cause visibility issues for other drivers.
Reflection Regulations Table
| Aspect | Regulation | Details |
|---|---|---|
| Maximum Reflection (Front) | 20% | Applies to front side windows |
| Maximum Reflection (Back) | 20% | Applies to back side windows |
| Restricted Colors | None | No specific colors are banned |
| Legal Colors | All | All colors are permissible |
Explanation of Reflection Regulations
Reflective tints contain metallic elements that help reflect incoming light. While they can reduce heat and glare inside the vehicle, excessive reflection can impair visibility for other drivers on the road. Therefore, Minnesota law limits reflection to 20% for both front and back side windows.
Impact on Visibility and Safety
The reflection limits are crucial for maintaining road safety:
- Glare Reduction: Helps reduce glare from sunlight or headlights, improving driver comfort.
- Visibility: Ensures that other drivers are not blinded by reflections from tinted windows.
- Aesthetic Considerations: While reflective tints can enhance a vehicle’s appearance, they must comply with legal standards to avoid fines.
By adhering to these regulations, vehicle owners contribute to safer driving conditions for everyone on the road.
Multi-Vehicle Regulations in Minnesota
Minnesota’s window tint laws vary based on the type of vehicle, recognizing the different needs and purposes of various vehicles. This section will explore these distinctions and explain why they matter.
Multi-Vehicle Regulations Table
| Vehicle Type | Special Regulations | Notes |
|---|---|---|
| Passenger Vehicle | Front and rear windows must allow over 50% VLT | No tint allowed on the windshield |
| SUV/Van | Front windows must allow over 50% VLT; no limit on rear | Versatile for privacy in rear compartments |
| MPV | Same as SUVs/Vans | Includes multipurpose vehicles like minivans |
| Commercial Vehicle | Front windows must allow over 50% VLT; no limit on rear | Business exemptions may apply for specific uses |
Explanation of Vehicle-Specific Tint Regulations
Minnesota law distinguishes between different types of vehicles to accommodate their varied uses and safety requirements. For instance, passenger vehicles like sedans are subject to stricter regulations, with both front and rear windows required to have a VLT of over 50%. This ensures that drivers have clear visibility and that law enforcement can see inside the vehicle if necessary.
For SUVs, vans, and other multipurpose vehicles (MPVs), the laws are more lenient regarding the rear windows. These vehicles often serve different functions, such as transporting goods or providing privacy for passengers in the back seats. Therefore, while front windows still require a minimum of 50% VLT, there are no restrictions on the darkness of the tint for rear windows.
Commercial vehicles also follow similar rules to SUVs and vans, acknowledging their use in business operations where privacy or security might be necessary. However, all vehicle types must adhere to the universal rule of no tinting on the front windshield.
Factors Influencing Tint Regulations
The variation in regulations is influenced by several factors:
- Visibility and Safety: Ensures that drivers have adequate visibility, especially important for passenger vehicles.
- Privacy Needs: Recognizes the need for privacy in larger vehicles used for transporting passengers or goods.
- Law Enforcement: Facilitates law enforcement’s ability to see inside vehicles during stops for safety reasons.
- Functional Use: Accommodates the different functional uses of commercial and multipurpose vehicles.
Medical Exemptions for Window Tinting in Minnesota
Minnesota law provides for medical exemptions to standard window tint regulations, recognizing that certain medical conditions necessitate greater protection from sunlight. This section will explore the conditions that qualify for exemptions, the process for obtaining them, and their significance.
Medical Exemptions Qualification Table
| Medical Condition | Allowance | Documentation Required |
|---|---|---|
| Migraines | Modified limits | Physician’s statement |
| Autoimmune disorders | Modified limits | Physician’s statement |
| Bloom syndrome | Modified limits | Physician’s statement |
| Albinism | Modified limits | Physician’s statement |
| Skin conditions | Modified limits | Physician’s statement |
Explanation of Medical Exemptions
Medical exemptions allow vehicle owners to apply a darker tint than normally permitted by Minnesota law. This is crucial for individuals with conditions that cause photosensitivity, such as migraines or autoimmune disorders. These conditions can make exposure to sunlight painful or harmful, thus justifying the need for additional protection through window tinting.
Process to Obtain a Medical Exemption
To secure a medical exemption in Minnesota:
- Physician’s Statement: The first step is obtaining a signed statement from a licensed physician. This document must specify the medical necessity for an exemption and recommend the appropriate level of window tint based on the individual’s condition.
- Documentation: The physician’s statement should be kept in the vehicle at all times as proof for law enforcement. Although there is no formal application process, having this documentation readily available is essential.
- Compliance: Ensure that the tint applied matches the specifications outlined in the physician’s statement. This helps avoid any legal issues during traffic stops or inspections.
- Renewal and Updates: If your medical condition changes, or if there are updates to your exemption status, it’s important to maintain current documentation and renew your exemption as needed.
Importance of Medical Exemptions
Medical exemptions serve several important purposes:
- Health Protection: They provide necessary protection from harmful UV rays for individuals with specific medical conditions.
- Legal Compliance: By following the exemption process, individuals can legally have darker tints without facing penalties.
- Safety: Ensures that drivers with medical exemptions can operate their vehicles comfortably and safely without compromising visibility.
Penalties and Fines for Tint Violations in Minnesota
Understanding the penalties associated with non-compliance with Minnesota’s window tint laws is crucial for vehicle owners. Violations can lead to significant fines and legal consequences, impacting both individuals and businesses involved in tint application.
Fine Structure Table
| Violation Type | First Offense | Subsequent Offense |
|---|---|---|
| Non-compliance | $125 | $135 |
| No certification sticker | $50 | $50 |
| Medical exemption violation | $125 | $135 |
Explanation of the Penalty System
In Minnesota, failing to comply with window tint regulations can result in fines that vary depending on the severity and frequency of the offense. The minimum fine for a first-time violation is typically around $125. This fine reflects the importance of adhering to the state’s visibility and safety standards.
Enforcement Procedures
- Initial Citation: When a vehicle is found to have illegal tint, law enforcement officers may issue a citation. This is often determined using a light meter to measure VLT levels.
- Repeat Violations: Subsequent offenses can incur higher fines, reinforcing the importance of compliance. Repeat violators might face stricter enforcement measures, including mandatory removal of non-compliant tint.
- Business Penalties: Dealerships and body shops that apply unlawful tinting can face fines starting at $375. This serves as a deterrent against providing services that violate state regulations.
Consequences of Violations
The consequences of violating tint laws extend beyond financial penalties:
- Safety Risks: Non-compliant tints can impair visibility, increasing the risk of accidents. This is particularly concerning for darker or reflective tints that reduce visibility for both drivers and law enforcement.
- Legal Ramifications: Persistent violations may lead to more severe legal actions, potentially affecting insurance rates and driving records.
- Vehicle Inspection: Vehicles with illegal tints may be subject to additional inspections to ensure compliance, which can be both time-consuming and costly.
Testing Methods for Window Tint Compliance in Minnesota
Ensuring compliance with Minnesota’s window tint laws involves several testing methods used by law enforcement to measure the level of tint on vehicle windows. Understanding these methods can help vehicle owners prepare for inspections and avoid potential penalties.
Testing Methods Table
| Method | Description | Used By |
|---|---|---|
| Light meter | Measures VLT to ensure compliance with state laws | Law enforcement officers |
| Visual inspection | Quick assessment for obvious violations | Inspection stations |
| Certification check | Verification of legal tint stickers | Both |
Explanation of Testing Methods
Light Meter
The primary tool used by Minnesota law enforcement to test window tint is the light meter. This device measures the Visible Light Transmission (VLT) percentage, ensuring it meets the state’s legal requirements. Officers typically use this tool during traffic stops when they suspect a vehicle’s windows are tinted darker than allowed.
- Accuracy: Provides precise measurements of how much light passes through the window.
- On-the-spot Testing: Allows officers to quickly determine compliance during routine stops.
Visual Inspection
While not as accurate as a light meter, visual inspections are often conducted at vehicle inspection stations. Inspectors look for obvious signs of non-compliance, such as excessively dark tints or missing certification stickers.
- Efficiency: Useful for initial assessments before conducting more detailed tests.
- Limitations: May not detect slight variances that a light meter would catch.
Certification Check
In Minnesota, a sticker indicating legal tint is required between the film and glass on the driver’s side window. This sticker acts as proof that the tint complies with state laws and is often checked during inspections.
- Verification: Ensures that the tint applied has been certified as legal.
- Documentation: Provides a quick reference for both vehicle owners and law enforcement.
Importance of Understanding Testing Methods
Knowing how window tint is tested can help vehicle owners:
- Prepare for Inspections: By understanding what officers look for, owners can ensure their vehicles are compliant before hitting the road.
- Avoid Penalties: Being aware of testing procedures can prevent fines and citations by ensuring all necessary documentation and stickers are in place.
- Ensure Safety: Compliance with tint laws contributes to safer driving conditions by maintaining adequate visibility.
Comparison with Neighboring States’ Tint Laws
Understanding how Minnesota’s tint laws compare with those of neighboring states is essential for drivers who frequently travel across state lines. This knowledge helps ensure compliance and avoid potential legal issues when driving in different jurisdictions.
Comparison Table: Minnesota vs. Neighboring States
| State | Front Windows VLT | Back Windows VLT | Special Notes |
|---|---|---|---|
| Minnesota | 50% | 50% | No tint allowed on windshield |
| Wisconsin | 50% | 35% | Reflective tint not allowed |
| Iowa | 70% | Any | Non-reflective tint on top 5 inches of windshield |
| North Dakota | 50% | Any | No metallic or mirrored tinting |
| South Dakota | 35% | 20% | No metallic or mirrored tinting |
Explanation of Interstate Considerations
Variations in Tint Laws
Each state sets its own regulations regarding window tinting, which can vary significantly:
- Wisconsin: Allows a slightly darker tint on back windows compared to Minnesota, but prohibits reflective tints entirely. This means drivers from Minnesota must ensure their vehicle’s tints comply with Wisconsin’s stricter back window requirements when traveling there.
- Iowa: Has more lenient rules for back windows, allowing any level of darkness, but requires a higher VLT for front windows at 70%. This difference is crucial for Minnesota drivers who might need to adjust their front window tints when driving in Iowa.
- North Dakota and South Dakota: Both states allow darker tints on back windows than Minnesota, with South Dakota permitting even lower VLTs for front windows. Drivers should be cautious of these differences to avoid fines.
Importance of Understanding Regional Differences
- Legal Compliance: Ensures that drivers remain compliant with local laws when crossing state lines, avoiding fines and penalties.
- Safety and Visibility: Different VLT requirements reflect varying safety standards and visibility concerns in each state, which can affect driving conditions.
- Travel Convenience: Being aware of these differences allows drivers to make necessary adjustments or obtain temporary exemptions if needed for interstate travel.
Common Myths & Facts About Window Tinting Laws
There are several misconceptions about window tinting laws that can lead to confusion and potential legal issues for vehicle owners. This section will address some of these myths and provide factual information to clarify the legal aspects of window tinting in Minnesota.
Myths vs. Facts Table
| Myth | Fact | Legal Basis |
|---|---|---|
| Tints are allowed as dark as desired if the vehicle is registered in another state | Minnesota law applies to all vehicles operating within its borders, regardless of registration | Minnesota Statutes Section 169.71 |
| Medical exemptions allow any level of tint | Exemptions specify the level of tint based on medical necessity and require documentation | Physician’s statement required |
| Reflective tints are legal if they reduce glare | Reflective tints are restricted to a maximum of 20% reflectivity in Minnesota | Minnesota Statutes Section 169.71 |
Explanation of Myths and Facts
Myth: Tints are allowed as dark as desired if the vehicle is registered in another state
Fact: Regardless of where a vehicle is registered, it must comply with Minnesota’s tint laws when operating within the state. This means that even if a vehicle is legally tinted in another state, it could still be subject to fines if the tint does not meet Minnesota’s standards while driving there.
Myth: Medical exemptions allow any level of tint
Fact: While medical exemptions do permit darker tints than usually allowed, they are not unlimited. The level of tint must be specified by a physician based on medical necessity, and proper documentation must be carried in the vehicle at all times.
Myth: Reflective tints are legal if they reduce glare
Fact: Although reflective tints can help reduce glare, Minnesota law restricts their reflectivity to a maximum of 20%. This ensures that other drivers are not blinded by reflections, maintaining safety on the roads.
Importance of Dispelling Myths
- Legal Clarity: Understanding the facts helps vehicle owners avoid unintentional violations and associated penalties.
- Safety Compliance: Ensures that all drivers maintain visibility standards necessary for safe driving.
- Informed Decisions: Provides accurate information for vehicle owners considering tinting options or seeking medical exemptions.
Post-Installation Requirements for Window Tinting in Minnesota
After installing window tints, vehicle owners must adhere to specific post-installation requirements to ensure compliance with Minnesota’s tint laws. Proper documentation and certification are crucial to avoid legal issues and penalties.
Post-Installation Requirements Table
| Requirement | Timeline | Notes |
|---|---|---|
| Certification sticker | Immediate | Must be placed between film and glass on driver’s side |
| Documentation | Within 30 days | Keep a copy of the tint installation receipt |
| Registration update | If required | Check if tint changes affect vehicle registration |
Explanation of Post-Installation Requirements
Certification Sticker
Minnesota law mandates that a certification sticker be affixed between the tint film and the glass on the driver’s side window. This sticker serves as proof that the tint complies with state regulations and is often checked by law enforcement during traffic stops.
- Immediate Placement: The sticker should be applied immediately after installation to avoid any compliance issues.
- Visibility: Ensure the sticker is clearly visible and legible to facilitate quick verification by officers.
Documentation
After installing window tints, it is important to retain all related documentation, including receipts and any certificates of compliance provided by the installer. This documentation should be kept in the vehicle as proof of legal compliance.
- Retention Period: Keep these documents for at least 30 days post-installation or longer if advised by the installer.
- Purpose: Provides evidence of compliance during inspections or if questioned by law enforcement.
Registration Update
In some cases, particularly if significant modifications are made, updating vehicle registration records may be necessary. This ensures that all vehicle details, including modifications like window tints, are accurately recorded.
- Verification: Check with local DMV offices to determine if an update is needed.
- Process: Follow any required procedures to update registration details promptly.
Importance of Proper Documentation and Certification
Adhering to post-installation requirements is vital for several reasons:
- Legal Compliance: Ensures that all aspects of the tint installation meet state laws, reducing the risk of fines.
- Proof of Legality: Provides tangible evidence that can be presented during traffic stops or inspections.
- Peace of Mind: Knowing that all necessary steps have been taken allows vehicle owners to enjoy their tinted windows without concern for legal repercussions.
Evolution of Minnesota’s Window Tint Laws
Minnesota’s window tint laws have evolved over time to address changing safety standards, technological advancements, and public concerns. Understanding these changes provides context for the current regulations and highlights the state’s commitment to road safety and visibility.
Amendment Timeline Table
| Date | Change | Impact on Compliance |
|---|---|---|
| 1985 | Initial tint laws established | Set foundational VLT limits for all vehicles |
| 2000 | Reflectivity restrictions introduced | Limited reflective tints to enhance safety |
| 2010 | Medical exemptions formalized | Provided clear guidelines for medical necessity |
| 2018 | Increased fines for non-compliance | Strengthened enforcement to improve adherence |
Explanation of Key Amendments
1985: Initial Tint Laws Established
The introduction of window tint laws in 1985 marked Minnesota’s first effort to regulate vehicle window tinting. These initial regulations set basic VLT limits to ensure adequate visibility for drivers and law enforcement. Establishing these foundational rules was crucial in promoting road safety and setting a precedent for future amendments.
2000: Reflectivity Restrictions Introduced
In response to concerns about glare and visibility, Minnesota implemented restrictions on the reflectivity of window tints in 2000. By limiting reflective tints to a maximum of 20%, the state aimed to reduce glare that could impair the vision of other drivers and enhance overall road safety.
2010: Medical Exemptions Formalized
Recognizing the needs of individuals with medical conditions requiring additional protection from sunlight, Minnesota formalized its medical exemption process in 2010. This amendment provided clear guidelines for obtaining exemptions, ensuring that those with legitimate medical needs could legally apply darker tints while maintaining compliance with state laws.
2018: Increased Fines for Non-Compliance
To strengthen enforcement and encourage adherence to tint laws, Minnesota increased fines for non-compliance in 2018. This amendment aimed to deter violations by imposing more significant financial penalties, thereby enhancing compliance rates and promoting safer driving conditions.
Importance of Understanding Legal Evolution
- Contextual Awareness: Knowing how laws have changed helps vehicle owners understand the rationale behind current regulations.
- Compliance Motivation: Awareness of stricter penalties encourages adherence to legal standards.
- Adaptation to Change: Understanding past amendments prepares vehicle owners for potential future changes in legislation.
Official Contacts for Window Tinting Compliance in Minnesota
For vehicle owners who have questions about Minnesota’s window tint laws or require assistance with compliance, several state agencies and departments can provide guidance. Knowing where to turn for accurate information ensures that you stay informed and compliant with the law.
Official Contacts Table
| Department | Contact Info | Purpose |
|---|---|---|
| Minnesota DMV | Phone: 651-297-2126 | Vehicle registration and general inquiries |
| Minnesota State Patrol | Phone: 651-201-7100 | Enforcement questions and compliance checks |
| Minnesota Medical Board | Phone: 612-617-2130 | Medical exemption processing and guidelines |
Explanation of Contact Resources
Minnesota DMV (Department of Motor Vehicles)
The DMV is the primary resource for general vehicle-related inquiries, including questions about registration, title updates, and compliance with tint laws. Vehicle owners can contact the DMV to verify whether their tint modifications require updates to their registration or to clarify specific legal requirements.
- Purpose: Assists with administrative aspects of vehicle ownership, such as documentation and certification.
- How to Use: Call or visit a local DMV office for personalized assistance.
Minnesota State Patrol
The State Patrol is responsible for enforcing Minnesota’s window tint laws. They can provide detailed information about testing procedures, penalties for violations, and how to ensure your vehicle meets legal standards. If you have been cited for a tint violation, contacting the State Patrol can help clarify next steps.
- Purpose: Offers guidance on enforcement-related issues and compliance expectations.
- How to Use: Contact the State Patrol directly for questions about citations or inspections.
Minnesota Medical Board
For individuals seeking a medical exemption for window tinting, the Minnesota Medical Board can provide information on the exemption process. This includes requirements for physician documentation, acceptable medical conditions, and how to maintain compliance with exemption guidelines.
- Purpose: Facilitates the medical exemption process and ensures proper documentation.
- How to Use: Reach out to the Medical Board for assistance with obtaining or verifying an exemption.
Importance of Contacting Relevant Authorities
- Accurate Information: Ensures that you receive up-to-date and reliable guidance directly from official sources.
- Compliance Support: Helps vehicle owners navigate complex legal requirements and avoid penalties.
- Issue Resolution: Provides a clear path for addressing citations, exemptions, or other concerns related to window tinting laws.
Conclusion
Minnesota’s window tint laws are designed to balance the needs of vehicle owners for privacy, aesthetics, and medical accommodations with the overarching goals of safety and visibility on the road. By understanding the state’s regulations on Visible Light Transmission (VLT), reflectivity, and medical exemptions, drivers can make informed decisions about tinting their windows while staying compliant with the law.
Key takeaways from this guide include:
- Compliance is Crucial: Adhering to Minnesota’s VLT and reflection limits ensures safety for drivers, passengers, and law enforcement officers. Non-compliance can result in fines, legal complications, and even mandatory removal of illegal tints.
- Medical Exemptions Exist: For individuals with qualifying medical conditions, the state provides a pathway to legally apply darker tints. However, proper documentation from a licensed physician is required at all times.
- Post-Installation Requirements Matter: Certification stickers and proper documentation are essential for proving compliance after tint installation.
- Regional Variations Are Important: Drivers who travel across state lines should familiarize themselves with neighboring states’ tint laws to avoid unexpected penalties.
- Enforcement is Active: Minnesota uses light meters, visual inspections, and certification checks to ensure compliance. Understanding these methods helps vehicle owners prepare for inspections.
Citations:
[1] https://www.hallinjurylaw.com/blog/window-tint-laws-in-minnesota/
[2] https://www.cartintlaw.com/minnesota/
[3] https://myeyerx.net/minnesota-window-tint-medical-exemption/
[4] https://bravoprotectionmn.com/window-tinting-minneapolis/minnesota-window-tint-laws/
[5] https://myeyerx.net/window-tint-laws-by-state/minnesota-legal-tint/
[6] https://www.cbsnews.com/minnesota/news/minnesota-window-tint-laws/
[7] https://www.fox21online.com/2022/07/07/laws-for-vehicle-tinting-in-minnesota/
[8] https://tintwiz.com/window-tint-laws/minnesota
[9] https://aacriminallaw.com/minnesotas-window-tint-laws/
[10] https://www.mobile-install.com/blog/entryid/117/what-is-the-legal-limit-for-window-tinting-in-minnesota
[11] https://wjon.com/what-to-know-about-the-minnesota-vehicle-tinted-window-law/
[12] https://www.hallinjurylaw.com/blog/window-tint-laws-in-minnesota/
[13] https://myeyerx.net/minnesota-window-tint-medical-exemption/
[14] https://myeyerx.net/window-tint-laws-by-state/minnesota-legal-tint/
[15] https://www.nationaltintinglaws.com/minnesota-window-tint-laws/
[16] https://www.cbsnews.com/minnesota/news/minnesota-window-tint-laws/
[17] https://www.fox21online.com/2022/07/07/laws-for-vehicle-tinting-in-minnesota/
[18] https://tintwiz.com/window-tint-laws/minnesota
[19] https://www.hallinjurylaw.com/blog/window-tint-laws-in-minnesota/
[20] https://myeyerx.net/minnesota-window-tint-medical-exemption/
[21] https://myeyerx.net/window-tint-laws-by-state/minnesota-legal-tint/
[22] https://bravoprotectionmn.com/window-tinting-minneapolis/minnesota-window-tint-laws/
[23] https://tintwiz.com/window-tint-laws/minnesota
[24] https://www.tinting-laws.com/medical-exemptions/
[25] https://www.fox21online.com/2022/07/07/laws-for-vehicle-tinting-in-minnesota/
[26] https://www.fox21online.com/2022/07/07/laws-for-vehicle-tinting-in-minnesota/
[27] https://www.mncourts.gov/Documents/1/Public/Carver/Carver_Fines.pdf
[28] https://myeyerx.net/window-tint-laws-by-state/minnesota-legal-tint/
[29] https://tintwiz.com/window-tint-laws/minnesota
[30] https://www.tinting-laws.com/minnesota/
[31] https://www.co.itasca.mn.us/224/Common-Violation-Fine-Amounts
[32] https://www.revisor.mn.gov/statutes/cite/169.71
[33] https://wjon.com/what-to-know-about-the-minnesota-vehicle-tinted-window-law/
[34] https://www.hallinjurylaw.com/blog/window-tint-laws-in-minnesota/
[35] https://bravoprotectionmn.com/window-tinting-minneapolis/minnesota-window-tint-laws/
[36] https://minnesotanow.net/legal-window-tint-mn/
[37] https://www.cbsnews.com/minnesota/news/minnesota-window-tint-laws/
[38] https://myeyerx.net/window-tint-laws-by-state/minnesota-legal-tint/
[39] https://tintwiz.com/window-tint-laws/minnesota
[40] https://www.hallinjurylaw.com/blog/window-tint-laws-in-minnesota/
[41] https://wjon.com/what-to-know-about-the-minnesota-vehicle-tinted-window-law/
[42] https://www.reddit.com/r/minnesota/comments/tfvm7m/are_tint_laws_no_longer_enforced_in_minnesota/
[43] https://b105country.com/minnesota-window-tint-laws/
[44] https://worldpopulationreview.com/state-rankings/tint-laws-by-state
[45] https://geoshieldusa.com/pages/window-tinting-laws-by-state
[46] https://tintwiz.com/window-tint-laws-by-state
[47] https://filminstallers.com/window-tint-laws/minnesota-tint-law-mn-tint-law/
[48] https://www.raynofilm.com/blog/automotive-window-tint-laws-by-state
[49] https://www.lvtint.com/blog/what-states-allow-you-to-tint-window-in-2024/